Tracking The Z

Well we finally got to do it... when I bought the car she needed work, I did what I could so she could run a few autocross events. Even managed to win the STR Solo Class for the year in 2010 for the SB Region of the SCCA (Event Pics). I always wanted to get her on a track and today was the day... 

It's been about a month since I got her back and finally running. We did a Cars and Coffee event (car show) and then I registered for the Festival of Speed open track time at Gingerman Raceway. I had to do a lot to prepare for the event. I decided to pull the Shelby Cal500 wheels that were on her when I got her (14x6) out of storage. Cleaned them up a little, and made the decision to just throw some cheap used rubber on them as I knew I just need to learn the car and get used to driving her. 

I had to get all my race stuff back together. Luckily my SA2005 helmet is still good, my air tank and compressor got to work, and I pulled together my race day tool bag and found most of the things that went in it. I had the anxiety of prepping for the race all week and of course didn't sleep the night before. I got up early, packed food, packed the car, and rolled out... 

I had a beautiful sunrise drive on the way to South Haven. I rolled up into the track, signed my waiver, found a parking spot and headed to registration and tech. It eerily felt like old times, but also so new or like I have never done it before. I signed up for the open track event portion. We got three heats of 20 minutes each on course. No timing, passing only in the straight aways, but still workers on corners, and about 20 cars at the same time. 

I was probably the car with the least horse power... much less than half (more like 1/4 or less) of the HP in the Hellcat, McLaren, Porsche, and the monster prepped Bells Brewery Camaros that all passed me like I was standing still on the back straight... I will say though, I think I was the best looking though... 

The first trip out I really took it easy... I have never been on a track on regular street tires, and I was on some used all season radials and I kinda regretted right away not spending a little more on tires. I soon got over that as I was just having fun driving, taking corners, trying to stay on line, listening to the tires, enjoying the track, and watching for the McLaren creeping up quick to pass me. 

The break between the 1st and 2nd time on track was short, I got another coffee quick and walked a bit and chatted with other drivers. The 2nd run I pushed it more. I tried thinking more about shift points and planned ahead where to shift and watched the braking markers better. My other times on the track I was in cars much more prepped for the track, so it was different for me learning what she could, or more importantly, would do for me. Also realized she is capable of much more so I felt like I was letting her down. 

The final set we got, I really pushed it more. I got the rear end loose a couple times, and was honestly then glad I got the cheap rubber. I feel like I got to feel the car kinda raw, how she came from the factory (she is really bone stock) and then I can build up from there. One car broke down on course so that sucked a little of our track time while they cleared the car, but I felt like my laps were getting better, I was learning how she liked to turn and how to keep traction on the rear tires so we could pull stronger through the turns.

Once we finished... I didn't stay long (it was a whole weekend event), I mingled with a few friends, and then I rolled home... unlike many of the fancy cars there the Z arrived on her own power, and then got us home. No trailer here. 

So what was my favorite part of it all... well it was time with the kids on it. The night before, N asked to go for a sunset cruise to take pictures with her new camera. We did (first picture) and had a nice chat as we drove from spot to spot for pictures. It was really fun working with Cruz to get her ready, especially with all the trouble getting the race wheels on her (Blog: Garage Lessons). He helped get the wheels on, new bumper, and learned tools and applications and why I put more air in the tires. Mari well, when I told her I was going to race against a McLaren, she replied, "I rather just see a monster truck". 

I posted videos on my youtube channel... ha... here is my arrival, search the page for more from that trip and others: 

Back to Black

Well it wasn't black before, but it is now, and so are the bumpers (well bumper for now). I will say it has been maybe one of the most refreshing things to happen during quarnatine is that I got my Z back. 

After years of lying to myself that I would get the Z fixed myself, and then time to save up some money... I sent her off (Blog: There Goes My Z) and most recently got her back (Blog: Here Comes My Z). 

The first project, which was the project I started just before sending her off, was new bumpers and new hatch (well new to me). I came across a deal to trade my rear hatch for what is called a "Pantera Hatch" for my Z. It is a custom fiberglass insert that replaces the rear glass. It is very rare, and while it was in terrible shape, I figured I could get her under control. 

Well the hatch is kinda under control... she came with mismatched paint, tons of cracks, paint chips all over... and I made the decision to not spend money to have it professionally painted, and that I wasn't going to spend a ton of time on body work for her. What I did was remove her, clean her up well, sand her down and prep her for just a simple matte black paint. It will buy me time, and save me money, but make the hatch less obnoxious for now while I focus on other projects. 

I have a 280Z that came with heavy bumpers. With changing crash test requirements, the later model Z cars had gas shocks (heavy) installed behind humungous chrome bumpers (mega heavy). Just the bumpers weighed 76 pounds combined, and the 240z bumpers I got combined weigh under 16 pounds! I removed the bumpers right away when I got her. So my car lost I would guess 60 pounds including the shocks. She was kinda naked looking, some people like them without bumpers, but I really could not wait to her these on the Z. 

The front fit, but not perfect. Cruz helped me hammer, tighten, bend them in as best we could but I might have to mod those brackets as well. Unfortunately the rear brackets I purchased don't fit at all, I am deciding if I return them or if I try to mod them myself. The joys of working on a car that is older than you are... she is 45 now and while she looks better than ever in my opinion... she needs work. Also the work is more fun with my son, as we learn together, as I teach him, and we get some fun joy rides when we complete something (Blog: Garage Lessons)

Not only has she lost weight during quarantine, but she looks better, and is running! 

Here Comes My Z

This afternoon I drove my 1975 Datsun 280z. I got to shift gears, got to roll the windows down, got to take Cruz for a drive along the St. Joseph River. I got to remember what it felt like to just drive for the fun of it, for pure enjoyment, to smile ear to ear while smelling exhaust and cruising past corn fields. 

I had not driven her since 2013. When I started working at La Casa the combination of my pay cut and crazy schedule meant no time to race, no time to work on the car and no money to spend on her either. 

My last post on this blog, "There Goes My Z" was posted on May 3, 2018. For a few years I would push her out of the garage, washed her, and put her back (Winter Nap). It was a sad ritual. After years of collecting dust, I finally got her towed away. 

My friend Jim over at EurAsia Import Specialists offered to take her and start slow to figure out all that was wrong, and make a plan to get her done. I owned her since 2010 (first post) and she never ran great. I did a lot of little mechanical things to keep her moving, but I mostly did a lot of cosmetic stuff. She wasn't a super looker but I got her looking good, but she wasn't running as well as she looked. I kept chasing fuel pressure issues, injection issues, electrical bugs... so I needed an expert. 

In just over a year we did a lot to her... Jim lead the charge, I tracked down 40+ year old parts, some modern updates, but mostly keeping it originalish, if thats a word. We did:

new injectors

new fuel pump

new battery

new fuel lines

new fuel sender

nearly all new sensors

new cold start valve

new front bearings

new sway bars (front and rear)

new alternator

new battery

new plugs

new front brakes

rebuilt fuel tank

rewired fusible links

So much I can't even remember... 

I want to thank Jim and EurAsia for their time and flexibility. Jim's knowledge of the car, and the attention to detail was second to none. From the tire shine when I picked up her up, to the detailed and cleaned up engine bay, to the help putting the grill back together and pulling the old 280z bumper shocks, and even tips on where to get the best gas. 

It was fun to drive today, looking forward to enjoying her this summer and here is to whatever the future brings for her... paint job, motor rebuild, race track visit... who knows. Either way, here comes my Z...